CAMBRIDGE AUDIO - Przetworniki cyfrowo-analogowe - DAC Magic PLUS
| Twin Wolfson WM8740 24bit DACs used in dual differential configuration |
| New Anagram Technologies ATF2™ 24-bit/384kHz audio up-sampling / jitter reduction |
| Optional Digital Preamp mode allowing connection directly to power amp or active speakers |
| 24-bit/96kHz driverless USB Audio 1.0 |
| 24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes |
| Asynchronous USB transfer for very low jitter |
| Selectable digital filters - linear phase, minimum phase and steep |
| Balanced XLR audio output and RCA phono output |
| Two 24 bit digital inputs (with optical or coaxial for each) |
| External input for optional BT100 Bluetooth receiver - allows audio to be streamed and up-sampled from any paired Bluetooth device |
| Supports high quality apt-X Bluetooth CODEC as well as standard SBC Bluetooth CODEC |
| Available in black or silver finishes |
| D/A Converters: |
Dual Wolfson WM8740 24bit DACs |
| Digital filter: |
Analog Devices ADSP21261 DSP upsampling to 24-bit/384kHz |
| Analogue filter: |
2-Pole Dual Differential Bessel Double Virtual Earth Balanced |
| Frequency Response: |
20Hz to 20kHz (±0.1dB)* |
| THD @ 1Khz 0dBFs: |
<0.001% 24-bit |
| THD @ 1kHz -10dBFs: |
<0.001% |
| THD @ 20kHz 0dBFs: |
<0.002% |
| Signal to Noise Ratio: |
-112dBr |
| Total correlated jitter: |
<130pS |
| Crosstalk @ 1kHz: |
< -130dB |
| Crosstalk @ 20kHz: |
< -112dB |
| Output Impedance: |
<50ohms |
| Max. output level (unbalanced) |
2.1V rms |
| Max. output level (balanced) |
4.2V rms (2.1V per phase) |
| Digital input word widths supported: |
16-24bit |
| Digital input sampling frequencies supported: |
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz**, 192kHz |
| Audio output up-sampling: |
Fixed 24-bit/384kHz |
| Max power consumption |
12W |
| Dimensions (H x W x D): |
52 x 215 x 191mm (2.0 x 8.6 x 7.6”) |
|
1.2kg/2.6lbs |
|
|
|
|
| * |
Steep filter disabled |
| ** | Digital 1 & 2 Inputs only |
